簡體
語言選擇

電子工程師(Electronic Engineer)   No.4060616

¥10-12K
工程部|
1人|
廣東東莞
|3小時50分鐘前刷新
學歷要求
本科
工作經驗
2年
年齡要求
不限
現居住地
不限
Roles and Responsibilities:
1. Lead and Take responsible for engineering related electronic IC related PCB/PCBA,electrical modular design and development per customer’s requirement, including component’s selection and functionality definition. Meanwhile, assist to analyze and solve big and complex electronic PCBA and assembly issue from production line.
根據客戶性能要求進行PCB/PCBA IC 電路, 電子模組設計與方案功能討論;包括電子功能器件的選型,功能參數定義; 同時,積極支援並解決PCB組裝生産過程中遇到的問題。
2. Join in customer’s solution discussion & evaluation of technical reliability risk from assembly and testing method; need to transit into electrical engineering specification & wire mapping prints;
參加客戶所提供的前期方案可行性設計評審,從組裝與測試方法角度進行可靠性風險識別;並轉換成相應的電子工程技術規範與接線圖。
3. Cooperate with mechanical design engineer to finish connectors, cabling/harness with electrical device/PCB assembly from outline/layout design.
輔助機械設計工程師完成與電子器件/PCB組裝相關的連接器,線束線纜,適配器的layout設計模型與輪廓佈局圖。
4. Support NPD engineers and testing engineer to complete electrical items related protocol validation plan in time; and join in root cause analysis for electrical & transition performance failure with team.
支援NPD工程師和測試工程師 MVP電性能相關的測試計劃及測試方法的制定;並開展測試失效後的原因分析。
5. Assist local sourcing team on key electronics devices’ supplier’s matrix selection, PCBA Gerber files & electrical prints interpretation accordingly.
輔助內部採購部門在關鍵電子器件供應商選擇,能力評估;以及供應商端的技術規範解讀。
6. Generate the correct format Gerber file or ODB++ file that fit for board house better understanding and manufacture, negotiated with board supplier or PCBA supplier and figure out the engineering question with them
負責電路板設計的輸出的製造文件,必須有效,無誤,適合加工,同時負責協調與PCB或者PCBA供應商的技術溝通和工程問題解答
7. Provide active support to tackle customer complaints on electrical performance debugging and improvement for both finished products and coaxial/TP Cables/connectors component level electrical performance together with internal team & supplier.
積極參與客戶投訴的改善措施,與內部團隊和供應商一起不斷改善與優化成品與電線電纜主要電性能和傳輸性能。
經驗及學歷要求Experience/Education Required:
1. Majored in Electronics/electrical course, College or above.
電子相關專業;本科及以上
2. Over 2 years of electronic modular or electrical circuits’ design and development experience; Signal transition (LF/HF/RF) or cable design experience is a plus.
2年以上的電子電路設計開發和分析工作經驗,信號(差模/共模)傳輸設計或線纜經驗者優先考慮。
3. Have solid knowledge of electrical circuit, electronic components, filter circuit, EMI/EMC
紮實的電路知識,電子元器件,濾波電路與電磁相容(干擾)等。
4. Be proficient in using the software, such as CAD, PROTEL, etc.
熟練使用相關軟體,如CAD,PROTEL發;
6485 6063-|161 1223 0409 955. Good English skill 英語良好.
工作地址:
廣東東莞東莞市橋頭鎮鄧屋新湖工業區橋龍路2號 查看地圖
面試地址:
廣東東莞東莞卡萊醫療
聯繫人:
CMT HR
電子郵箱:
(企業未公開,請通過卓博人才網投遞簡歷)
聯繫電話:
(企業未公開,請通過卓博人才網投遞簡歷)
應聘 收藏
小程式

使用微信掃一掃

通過小程式查看該職位

分享 舉報
國家法律規定禁止用人單位在招聘面試過程中向求職者收取任何費用(抵押金、培訓費等),請求職者提高警惕。